Loading... Please wait...

Like Us on Facebook!


Add to Wish List

Click the button below to add the W451836-3.5X 35” 45-70 #3.5 Profile Honed Tapered Octagon BPCR to your wish list.

You Recently Viewed...

W451836-3.5X 35” 45-70 #3.5 Profile Honed Tapered Octagon BPCR


Product Description

.45-70 Cal, 1:18 Twist, 35” Long, 1”-2” Receiver Stub, 4140CM, Honed Octagon Tapered BPCR Barrel. #3.5 Profile- 1.12” at the breech, tapered down to .95” at the muzzle. Button Rifled, Stress Relieved, and Air Gauged.

Write your own product review

Product Reviews

  1. rem rolling block barrel 5 Star Review

    Posted by on 10th Apr 2019

    This barrel was purchased for a Remington Rolling Block project, a 45-70 BPCR rifle. This is the second one I have purchased for re-barreling rolling block's. Both had very smooth bores and needed very little exterior clean up before bluing. Both rifles are very accurate and clean with little effort. I Highly recommend them.

  2. sharps barrel 5 Star Review

    Posted by on 31st Dec 2016

    while turning for threads, indicated on bore, the runout at the muzzle was very,very slight. And this was a 36" blank, 3 1/2 full octagon. one of the straightest I've installed in years. very smooth bore, and best of all, a large enough breech diameter for the Sharps(1.230") This 3 1/2 taper allows for an easier carrying hunting rifle than a #4 contour, balance point slightly closer to frame. Most of my Sharps are built for hunters,(10 to 1) not silhouette shooters, so the lighter, 30" barrels are more desirable.. wish you made the #3 with the larger breech diameter, would buy a lot.

  3. Well balanced Winchester High Wall 5 Star Review

    Posted by on 16th Mar 2015

    This barrel was purchased for a Winchester project, a 45-70 BPCR rifle. I wanted to use the 3.5 contour to have a finished rifle that was not quite so muzzle heavy for the 200 meter off hand chickens but still heavy enough to soak up some of the recoil of the 45-70 cartridge. After receiving the barrel I checked the bore with my bore scope curious about the finish improvement with the new lapped barrels, I was duly impressed and will be recommending them to clients in the future as a first choice as a barrel source.